View Single Post
Unread 04-29-2021, 04:23 PM   #83
Sclib
Registered User
 
Sclib's Avatar
 
Join Date: Mar 2021
Location: Green Valley, AZ
Posts: 89
Quote:
Originally Posted by DAVY
First, make sure that 2x4 is straight. So many times it's the board and not the mud. Also, make sure you don't have a hump in the mud at the ends that is causing it to look like a dip. Thinset isn't designed to fill in dips but we've all done it, especially if it less than 1/4 inch deep.
Thanks Davy, checked and 2x4 is straight (also checked with metal straight edge with same result). Also no high spots on ends causing issse….but I had not thought of that.

So, with that figured out, would it be best to level that area with skim coat and let dry OR just beef that area up when setting curb tile? Does it make a difference either way?
__________________
“Every day you learn something new is a good day”!!!

Scott
Sclib is offline   Reply With Quote