View Single Post
Unread 02-27-2020, 08:36 PM   #3
joshtp
Registered User
 
Join Date: Feb 2020
Posts: 11
That frying pan bolted to the flange is a great idea, wish I did that. I'll have to do that for the next shower.

I think my problem was that I set the drain (used as center screed point) a touch too high, and pounded the perimeter screed rail too low, so my slope was closer to 1/8" per foot.

I think redoing it might be the best course of action as you suggest, however I already used a stone to fix half the pan. The perimeter screed rail is nice and level all around. I will attest that deck mud gets very hard, and takes quite a bit of effort to sand it down.
__________________
Josh
joshtp is offline   Reply With Quote