View Single Post
Unread 02-12-2020, 10:40 PM   #4
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 21,844
Sometimes you don’t know what grit to start with. Ideally. You’ll start out with the highest grit that will flatten the partially eroded surface. Then run upwards through whatever grit makes you happy with the level of sheen.

I’d error on starting a little too high. If the polish starts looking lumpy, you need to start again with a somewhat rougher grit.

__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote