View Single Post
Unread 01-15-2020, 04:45 PM   #7
tstex
Registered User
 
Join Date: Feb 2016
Location: Houston and Columbus TX
Posts: 37
Thanks Jeff.

I have buffed it out and it seems to be okay now. I do not wish to coat it w anything at this point...Yes, 14-16 mm would almost be like a clear-cast coat on some of those wood products...

Here's what the manufacturer told me, but when it dries, it shrinks to 14-16mm.

"Before the mixture is poured into the mold, it is carefully cleaned and then sprayed with a thin layer of a clear gel coat material that is 20-25 millimeters thick. Cultured marble products have a protective layer of clear gel coat which provides the bright, shiny or matte surface of the vanity top."

Sure doesn't seem like that amt of coating is very protective,

thanks again,
tstex
__________________
Tom
tstex is offline   Reply With Quote