Ceramic Tile Advice Forums - John Bridge Ceramic Tile - View Single Post

paarlberg · 01-04-2022, 04:15 PM

Drip edge, it is kind of hard to see, but it is there. Basically a 2x4 ripped at an angle to have a point and allow the fascia (PVC) and flashing up under it.

I am in Atlanta if that matters for freeze/frost.

I had thought about placing sleepers on top of the epdm, then plywood and a waterproof membrane on that. Then the tile on top of all of that.

01-04-2022, 04:15 PM	#6
paarlberg Registered User Join Date: Apr 2013 Location: NE Atlanta Posts: 20	Drip edge, it is kind of hard to see, but it is there. Basically a 2x4 ripped at an angle to have a point and allow the fascia (PVC) and flashing up under it. I am in Atlanta if that matters for freeze/frost. I had thought about placing sleepers on top of the epdm, then plywood and a waterproof membrane on that. Then the tile on top of all of that. Attached Images __________________ David Last edited by paarlberg; 01-04-2022 at 04:42 PM.