Thread: Drilling Tile
View Single Post
Unread 02-26-2007, 05:47 PM   #10
Registered User
sandbagger's Avatar
Join Date: Mar 2005
Location: Tucson, AZ
Posts: 5,383
but I've heard it suggested here to bore a hole through a piece of wood with a similar sized bit,
I used a scrap piece of tile with the hole saw. But I started the hole from the back and it was much easier to get a good bite. Very light pressure to start and a steady hand. The bit will walk a little, but that's OK - you're not trying to be pretty.

"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government -- lest it come to dominate our lives and interests."

Patrick Henry
sandbagger is offline   Reply With Quote