Thread: Drilling Tile
View Single Post
Unread 02-26-2007, 10:02 AM   #5
Registered User
Join Date: Apr 2006
Location: Whitney Point, NY
Posts: 379
I can vouch for those drills as I bought a set off eBay from the same seller. Arrived very quickly too.

The most I've cut with one bit is 4 holes through hard porcelain. I felt I got my money's worth!

I used a drill press to drill my tile, but I've heard it suggested here to bore a hole through a piece of wood with a similar sized bit, then use the wood as a guide for diamond bit. Maybe you can steady it on the wall tile with some double sided tape or hot glue.

And use water, as was mentioned before!
Tim_4_Tile is offline   Reply With Quote