View Single Post
Unread 10-09-2009, 04:36 PM   #6
Registered User
Join Date: Mar 2006
Location: Southeast Michigan
Posts: 16
Yeh, I'm a big fan of old looking like new, too! :-)

I only have two runs of baseboard, all of ~10 feet total, as a door cuts through the one run.

That leaves the door jams and plinth blocks. I'm not taking those apart; I've had enough "surprises" everywhere else in this job already... :-)

Admittedly, just a simple hand jamb saw should be ok here, I'd think. Except I do have an inside corner where hinge side of entry door and hinge side of linen closet door abut. Actually, that's casing for each of those sides abut...

Nothing's ever simple with old houses.

RandyD -- enthusiastic tile n00b
qzrrbz is offline   Reply With Quote