Thread: wet saw mystery
View Single Post
Unread 06-06-2019, 01:29 AM   #8
TileStuff
Registered User
 
Join Date: Mar 2019
Posts: 29
Runout on the blade shaft could be the culprit, accentuated by dulling. This would be consistent with the curving you described.

Was playing with a cheap Rigid tile saw on display recently, table was decent, but the runout caused the blade to have over 1/8" of wobble.
__________________
Jesse

Last edited by TileStuff; 06-06-2019 at 01:36 AM.
TileStuff is offline   Reply With Quote