View Single Post
Unread 10-14-2019, 06:03 PM   #6
Yes si
Registered User
Yes si's Avatar
Join Date: Jan 2019
Location: Houston Texas
Posts: 33
Hi Mark,
In regards to getting a stud in that obstructed wall void, maybe try to fasten a couple of “L” bracket to the top of the 2x4 before setting it in the wall void then if you can get your driver in that void you’ll be screwing straight up to the top plate. You may need to split the stud in 2 to get it in then simply “mend “ it with a piece of 2x4. Hope this helps.

Last edited by Yes si; 10-14-2019 at 06:07 PM. Reason: Corrections
Yes si is offline   Reply With Quote