View Single Post
Unread 06-19-2019, 11:03 AM   #6
Registered User
Join Date: Mar 2011
Location: Michigan
Posts: 69
My quarter round is bigger than what Peter shows, so it won't fit if I bring the tiles past the corner. Here is a sketch using the actual cross sections of the tiles. At the bottom, I left the void showing. At the top, I showed the kerdi fabric pulled across the corner, with the void being filled with thinset. I need to do that so the tile has something rigid to adhere to.
I'm thinking about smearing the edges of the drywall with kerdi fix before covering the remaining edges with kerdi, and filling the holes that are left afterwards with kerdi fix. The bottom of this niche will probably see quite a bit of water since it's only 15" off the floor, so I'm worried that this might not be enough.
Catmandu is offline   Reply With Quote