View Single Post
Unread 01-19-2022, 03:07 PM   #2
cx
Moderator emeritus
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 95,321
Welcome, Kaivan.

No, I think you should have your "tile setter" remove the Type S mortar and replace it with the industry required minimum of 1 1/2" of a more appropriate sand/cement mix, while being absolutely sure the weep holes in the drain remain unobstructed and protected.

Shouldn't hurt the hot mop, but if it does, same guy should see that it's properly repaired.

And that all presumes that the hot mop is properly sloped to the drain.

My opinion; worth price charged.
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is online now   Reply With Quote