View Single Post
Unread 06-15-2019, 08:48 PM   #8
Kman's Avatar
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 11,282
If you're wanting a zero-entry shower, you just have to account for the water proofing materials, setting materials, and tile thicknesses, both inside and outside the shower.

But most importantly, have the minimum 1/4" per foot of slope on the shower floor to the drain in every direction. A little more slope is better. I usually make mine around 5/16 - 3/8".

Sometimes it just takes laying everything out in a mock-up to see how it will go.

The top ten reasons to procrastinate:

Kman is offline   Reply With Quote