View Single Post
Unread 07-26-2021, 12:14 PM   #2
Lazarus
Texas Tile Contractor
 
Lazarus's Avatar
 
Join Date: Oct 2006
Location: Beaumont, Texas
Posts: 8,463
Tyler....as you have discovered, tiling over plywood is a real crapshoot and looks like you came up "snake eyes."

While it "can" be done, "should" be done is another matter. You say nothing about the thickness or number of plywood on the floor. As to it being wavy, that is a red flag. It shouldn't be.

Can you pull up tiles, try to clean them and the plywood and stick 'em back down? Not too freakin' likely.

Truth be told, the only reasonable and permanent option is to tear this crap out, probably to the studs....a minimum of a layer of 3/4" plywood...or two layers of 1/2" covered with a cement board, bedded in morter and screwed down. It's the only way I would guarantee the floor.

Yeah...it's money, but do you ever want to have to tear it out and do it again?
__________________
Laz
Lazarus is offline   Reply With Quote