View Single Post
Unread 04-11-2021, 06:10 PM   #10
Registered User
Join Date: Jan 2019
Location: Toronto, CANADA
Posts: 87
Thank you, CX.

Is there anything I can do/add to decrease the deflection in this situation? Essentially it would seem that about half the joist in the floor are extremely suitable to tile and the other half (in the middle) achieve only L/292.

I definitely want to remove the pine floor in the bathroom area, so at present the plan would still be 3/4" plywood screwed/glued onto the joist with Ditra on top if at all possible and reasonable.

In the meantime I will attempt to determine the wood type in the joist. Now that they are exposed I suspect my father may be able to identify them. I'll also take some time to review/recheck all the measurements to ensure that I have the correct deflection estimate.
otrex is offline   Reply With Quote