View Single Post
Unread 03-10-2021, 05:20 PM   #8
Registered User
jerrymlr1's Avatar
Join Date: Dec 2004
Location: Sarasota FL
Posts: 1,475
That's some funky way of wrapping the tile. I would want to inspect it and check flatness and dimension precision. Also check for different lots. With that pallet setup it wouldn't surprise me to see a couple different shades in there.

As for installing, again do whatever you can to get it flat. Then a 1/2" trowel, backbutter, and you should be good to go Travis. Have you got a wetsaw that'll cut that stuff? I would also keep a cinder block handy to dress the blade and fairly often.

If you can do 18x18 you should be able to manage this, I think anyway.
jerrymlr1 is online now   Reply With Quote