View Single Post
Unread 01-18-2020, 11:43 AM   #10
Registered User
Join Date: Jan 2020
Posts: 17
So it turns out I have 1 pair of studs that are 22 inches on center and Schluter says for 1/2 kerdi board 16 inch on center is the max spacing. Adding a stud for the height of the shower will be tough because it has blown in insulation. I am thinking to possibly use Densshield for that section of the wall and then using Kerdi membrane and joining to the the Kerdi board. Do you think that is my best option? The main reason for densshield is I already have several sheets left over from when they built the house.

EDIT: The other thing I can do it built it up to about 1/4 below flush with the existing studs, if I do that can I wet shim the last 1/4 inch?

Last edited by kdawg89; 01-18-2020 at 12:44 PM.
kdawg89 is offline   Reply With Quote