View Single Post
Unread 01-16-2020, 08:49 AM   #7
ss3964spd
Moderator
 
ss3964spd's Avatar
 
Join Date: Jul 2005
Location: Fairfax, Va
Posts: 3,332
Send a message via Yahoo to ss3964spd
If they insist on installing a bracket on the curb, Kelly, allow them to drill only as deep as the tile is thick, say 3/8". Then have them cut the SS bracket mounting screw to 3/8". In preparation for this you'll have already made a Depot or Lowes or Menards run and picked up some JB weld clear epoxy, the one with the little nozzle that mixes parts A and B as they are dispensed. Squirt that into and fill the hole, poke at it a bit to make sure no air is trapped, set the bracket and insert the screw. Let it set up for as long as you can make the installers wait.
__________________
Dan
---------------------------------------------------------------------------------
If I recall correctly my memory is excellent, but my ability to access it is intermittent.
ss3964spd is offline   Reply With Quote