Thread: Grab Bars
View Single Post
Unread 11-19-2020, 09:23 PM   #2
jadnashua
Veteran DIYer- Schluterville Graduate

STAR Senior Contributor

 
Join Date: Jul 2004
Location: Nashua, NH
Posts: 14,270
I've used a couple of different fasteners from this company. https://www.wingits.com/products/typ..._bar_fasteners

Toggle bolts could work, but drilling into block sometimes isn't all that strong as it shatters. Tapcons are moisture resistant, but will rust over time. You may be able to buy SS toggle bolts. The furring strips may or may not provide a good bite, depends on how well they're actually anchored. Studs work, if you can find them and get something into them near their center.

This might work to 'see' what's behind the wall. https://walabot.com/static/New-DIY-V...122c228eaa.mp4
__________________
Jim DeBruycker
Not a pro, multiple Schluter Workshops (Schluterville and 2013 and 2014 at Schluter Headquarters), Mapei Training 2014, Laticrete Workshop 2014, Custom Building Products Workshop 2015, and Longtime Forum Participant.
jadnashua is offline   Reply With Quote