View Single Post
Unread 04-16-2020, 06:35 AM   #13
ss3964spd
Moderator
 
ss3964spd's Avatar
 
Join Date: Jul 2005
Location: Fairfax, Va
Posts: 4,273
Send a message via Yahoo to ss3964spd
John,

If you can find the screw heads there's a good chance you'll be able to force the driver bit through the mortar in the screw head and remove the screw. The use of an impact drill/driver might help. Removing them would be preferable to having the heads snap off - which drywall screws might do in this situation, leaving a bunch of drywall screw nubs that you'll have to deal with.

Yes, just set the blade depth to be the same as the subfloor thickness. Use a blade you don't care about.
__________________
Dan
---------------------------------------------------------------------------------
If I recall correctly my memory is excellent, but my ability to access it is intermittent.
ss3964spd is offline   Reply With Quote