Thread: Shower
View Single Post
Unread 04-04-2018, 05:19 PM   #12
ZZZK
Registered User
 
Join Date: Mar 2016
Posts: 426
The can probably has little clips that pop out and snag the backside of dry wall to hold the can in the hole. The can should go in over the finished ceiling. If you are tiling the ceiling it would go over the tile. The can and the light should be rated for wet area. The can will have a little gasket to seal the hole and the led should be fully sealed.

Now you could bust out the clips and hold the can in the hole via some other means... or maybe modify the clips.
__________________
John
ZZZK is offline   Reply With Quote