View Single Post
Unread 06-30-2008, 10:42 AM   #5
mozilla
Registered User
 
Join Date: Dec 2007
Location: Virginia Beach, VA
Posts: 6
My personal opinion would be to drill slowly (add water as you drill down) through the tile with a carbide bit, use Tapcon screws (concrete substrate) to hold down the flange. If you go this route, make certain that you level your flange using plastic shims. Once level, screw down the flange through the tile and the substrate. Good luck.
Attached Images
   
__________________
Randy
mozilla is offline   Reply With Quote