View Single Post
Unread 06-30-2008, 10:29 AM   #4
Sterving
Weekend Warrior
 
Join Date: Jun 2008
Location: Staten Island, NY
Posts: 85
Ok, so the plan is to make tile cut-outs in the areas where fasteners will go to avoid drilling. I don't have the appropriate drill bits, but I do have angle grinder, hand wet saw (for plunge cuts) and nippers. I think that should do it.
__________________
Dmitriy

If you want it done right, you have do it yourself. If you do it wrong, you know who is to blame.
Sterving is offline   Reply With Quote