View Single Post
Unread 11-24-2020, 09:25 AM   #2
Tiger Mountain Tile Inc
Registered Muser
Tiger Mountain Tile Inc's Avatar
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 7,039
This is how it starts

What does the other wall look like? Is your whole bathroom 62-inches wide or is the other wall a partition wall?

If it's a partition then you could just add two inches to that wall and move the tub down so that it sits flush with the end wall. This would probably affect the plumbing, FYI.

Otherwise, I'm assuming you will be replacing the green board on the end wall with some sort of tile backing. You can simply add the tile backing on top of the wall. You could also raise the ledge and put the tile backer board on the top and front of the ledge.

Also, I haven't mentioned anything about waterproofing yet but that ledge definitely needs it.

Edit: Also, do you need the tub? if you put a shower in there you could use the whole space
James Upton

Last edited by Tiger Mountain Tile Inc; 11-24-2020 at 09:35 AM.
Tiger Mountain Tile Inc is offline   Reply With Quote