View Single Post
Unread 01-14-2020, 01:35 PM   #5
dizzy2908
Registered User
 
Join Date: Jan 2020
Posts: 4
Joseph,
Thanks for the reply! I am not so much worried about cutting the radius. What is concerning me more is after I cut the ceramic tile, it will have an unfinished edge that isn't glazed and/or will not be visually appealing, unlike if it was on a straight corner where I could use a bullnose tile. But you are right, that the straight cuts would be cleaner than curved cuts.
__________________
Dan
dizzy2908 is offline   Reply With Quote