View Single Post
Unread 04-17-2019, 06:35 PM   #9
greenjp
Registered User
 
Join Date: May 2017
Posts: 210
Concur with the advice to move 'em down and make the access via the vanity. This would not be difficult. Use whatever saw you like to make the cuts, get yourself a sharkbite deburring/depth tool, a couple of their inline 1/4 turn shutoff valves, a couple of couplers, and a length of pipe. Wouldn't take you more than an hour.

jeff
__________________
jeff
greenjp is offline   Reply With Quote