View Single Post
Unread 02-24-2018, 09:33 PM   #9
mark999
Registered User
 
Join Date: Aug 2013
Location: st louis mo.
Posts: 456
Matt

Like Jim said,metal corner bead will work fine. If the outside wall is not plumb adjust the corner bead to make it so.It will hang past the plane of the wall either at the top or bottom. Just float that out with tape and drywall mud. I also like to float the tile side with thinset to flatten out that corner bead hump.

Now when you tile that corner with bullnose or a metal profile that edge will be plumb and will look nice.
__________________
Mark
mark999 is offline   Reply With Quote