View Single Post
Unread 01-29-2011, 09:00 AM   #1
hamfist
Registered User
 
Join Date: Jan 2011
Posts: 1
Noob - questions and (eventually) progress pics

First off, great site. I've a 1924 Craftsman with a main floor full bath (another full upstairs installed recently) that we're going to begin a reno on this week. We're hiring out the surround and tub install (I know my limits; I'm good at rough carpentry and electrical, just getting started tiling) but I will be doing the balance, including flooring, stool, vanity, wiring, etc. The wife wants tile, but we've springy floors in parts of the house. Here are the specifics:

1. 2x8 (varies actually from 7.25 - 7.75) Doug Fir joists, 16" oc, 13' 6" unsupported span. L/221
2. From the basement, I've got 1x9 tongue and groove subfloor, under 1x3 white oak then various layers of vinyl, 3/8 ply, etc. I plan on going down the the subfloor and working my way back up from there.
3. Floor in the bathroom is roughly 4' 6" x 5'.

I know that L/221 is rated for only wood or vinyl but along the bathroom wall furthest from the house center support beam (perpendicular to the joists) is a wall that creates a small room in the basement. I've yet to take a peak inside of the wall, but it is framed with 2x4s. This wall effectively cuts the floor joists under the bathroom in half, such that the springiness that's evident in the front of the house is all but absent in the back quarter where this wall is. Is there any easy way to take this wall into account for the calculation of the floor deflection? Is it possible that this wall makes the deflection of the relevant floor joists past L/360?

Thanks for you help. LMK if you need any more information or a drawing.

Ryan
__________________
Ryan
hamfist is offline   Reply With Quote