View Single Post
Unread 08-06-2012, 07:06 PM   #1
jzucosky
Registered User
 
Join Date: Mar 2011
Posts: 10
travertine pavers

I need some advice. I built a timber frame pavilion with a concrete floor(poured about 2 months ago) which is 16'x20'. We are in eastern PA and are going to use travertine pavers. The pavers are cut in a french pattern and have to be butted up for the pattern to be laid correctly. There is another patio and sidewalk which are going to be dry laid.
I've been reading through old posts and I am trying to come up with a plan. I only have HD and Lowes available for supplies.
I want to use Ditra over the concrete. I was going to use Laticrete272 under the Ditra and to set the travertine in but at $50/bag I'm not so sure.
any alternatives?
I am going to use polymeric sand on the dry laid portion. Would this be acceptable to use on the travertine thinsetted to the concrete? I'd like all the travertine to look the same. Thank you for your help.
__________________
jack
jzucosky is offline   Reply With Quote