View Single Post
Unread 02-08-2009, 06:02 PM   #2
Fort Collins, Colorado Tile & Stone Contractor
TileArt1's Avatar
Join Date: Apr 2007
Location: Fort Collins, Colorado
Posts: 2,733
Hello Dave, welcome!

You can put enough extra mortar beneath the v-caps to raise them to the flush level of the tile.

Some are made so they actually raise up a bit before going over the edge, kind of a subtle curve. (keeps stuff from rolling off your countertop as well as other things like water) Just make sure you have the backs flush against your countertop edge to ensure stability. Extra mortar beneath them will help level them out, though.
Roger (The FloorElf)

<img src= border=0 alt= />

Custom Tile & Stone installation
Fort Collins, Colorado

CTEF Certified Tile Installer #847

Social dysfunction can be traced to the abandonment of reason
TileArt1 is offline   Reply With Quote