View Single Post
Unread 09-07-2007, 07:22 PM   #4
koihito
A person, like you.
 
koihito's Avatar
 
Join Date: Jul 2006
Location: Kannapolis, NC
Posts: 1,932
I use 12" strips of stainless perforated with holes bent into an "L" and tie it to the rebar. A hammer drill, carbide bit, and much patients will get you through the porcelain. Take your time and don't be in a hurry, trying to drill to quickly is more likely to crack tile. Hopefully your on a stud to screw into, if not you'll need to use some good anchors (meaning no plastic plugs; real, honest anchors).
__________________
Nate

www.mikoskiconstruction.com
koihito is offline   Reply With Quote