View Single Post
Unread 11-24-2001, 02:57 PM   #2
Rob Z
Posts: n/a
Hi Jim

1. I would set the cut pieces at the same time.

2. Ideally, set the tile and grout...then install wood trim. I would not grout the area between the tile and the drywall. Trim will cover that gap.

3. I would use wood trim at the top of the stairs to meet the tile, unless the stairs are which case I would use a piece of tile-carpet trim from Schluter.

Rob, I only completed the Schluter address. You left off the .com

[Edited by John Bridge on 11-24-2001 at 05:09 PM]
  Reply With Quote