View Single Post
Unread 10-10-2007, 06:48 AM   #3
james36
Registered User
 
Join Date: Apr 2007
Location: Maryland
Posts: 65
I've been researching the same issue and I have found that thinset is the wrong thing to use here - it is simply not designed to be built up much beyond 1/4" - apparently there are shrinkage and other potential issues if you try to builld it up.

Many people on this forum are fond of SLC and I'm sure you will hear about this shortly. I filled my lowspot with Mapei's Planipatch product - I was easily able to fill the low spot and feather out the edges - I used an old level to screed the whole thing flat - easy!
__________________
James
james36 is offline   Reply With Quote