View Single Post
Unread 02-26-2020, 09:35 AM   #2
Kman's Avatar
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 11,376
Welcome back, Allison.

You run the risk of grout cracking if the tile is loose. I would use a punch and hammer and break the tile. It'll come out easy in pieces.

They usually set pretty tight, so getting another tile in there isn't easy. If the tile has built in spacers, shave them off on all sides without cutting into the face of the tile. It should slide in easily, and you'll probably want to use some thin spacers to center it vertically.

The top ten reasons to procrastinate:

Kman is offline   Reply With Quote