View Single Post
Unread 07-24-2022, 11:39 AM   #5
Registered User
Join Date: Jul 2022
Location: Central Fla
Posts: 44
Thank you for all your input. So it’s yes on the closet removal. I don’t feel comfortable with breaking up floor and repositioning the drain. Do you think it would look awkward if the shower was full square and that drain was kind of like in the corner ( the shower head is on the left as you enter the shower) and everything sloped down to it? Or would it look worse if I left the angle in there so I don’t have to mess with the roof. Hard to find pics on the internet to compare to...So if curb done with wood, how do you secure dura roc board to it and the membrane tightly over it without nailing in the liner on top and inside? Lastly, being a novice at this and not necessarily trying to go cheap as possible but rather easy as possible, would you recommend Kerdi system using their pre formed pre sloped shower pan and curb rather than concrete pre slope conventional shower pan based on my situation (angles, large area app 60” x 50” Thank you again and sorry for so many questions.

Last edited by Mike59; 07-24-2022 at 11:53 AM. Reason: Better explanation
Mike59 is offline   Reply With Quote