View Single Post
Unread 10-25-2012, 02:30 PM   #14
Andrew21
Registered User
 
Join Date: Nov 2005
Location: Long Island/Westchester, NY
Posts: 668
Kyle,
I had to special order this from Home Depot. GIves you 30 minutes to work with:

http://www.custombuildingproducts.co...erlayment.aspx

Don't forget the primer!!!

I found out that after doing my first SLC pour it wasn't that bad. You just need someone else to mix the product while you pour out the batch.

Anyway, after I plugged up the floor, I took up the foam around the edges and left them empty. Hung the drywall over it and there's no problem ever since.
You can get metal lath at home depot for about 7/8 bucks a piece. Forgot the measurements but you would need a few pieces. Oh yeah, might want to buy an automatic staple gun too (like 24 bucks) along with 'stainless steel' staples. Or if you have an air gun, get the stapler and have fun.
__________________
Andrew..but everyone calls me Andy
Andrew21 is offline   Reply With Quote