View Single Post
Unread 10-22-2020, 08:56 AM   #17
Moderator emeritus
cx's Avatar
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 91,934
Dave, you would need to make appropriate spacers to use above your ledger board to simulate the tile placement you'll end up with in your layout. Just some rips of plywood or boards or any similar material strong enough to support the first tile above the ledger until that first tile is set sufficiently to support itself and the tiles above.

I've moved your post from the other member's unrelated thread to prevent confusion in both places.

You could grind off the texture on that drywall and cover a couple inches of it and your KerdiBoard with KerdiBand to cover that joint and waterproof the "tub leg" properly. No, you won't have the required 2" overlap on the narrow portion in front of the curb, but you can lap onto the curb a bit there, too. Whatever you get is gonna be better than not having waterproofing in that area.

My opinion; worth price charged.


Last edited by cx; 10-22-2020 at 09:03 AM.
cx is offline   Reply With Quote