View Single Post
Unread 04-14-2019, 09:05 AM   #9
thedayrock
Registered User
 
Join Date: Apr 2019
Location: Central Texas
Posts: 34
Ok I’ve begun the work. Cut lines with saw and cut a decent channel with the circular saw. Not I am taking the hammer drill to drill down and I am going all the way down in the bit and not hitting dirt. That means the spot I need is a solid 8”-10” of concrete:





Do I keep working it or just run a pipe through channel less than 12” and use existing p-trap?

I also drilled down in the plumbers box and found that it is thicker than the drill bit as well.
__________________
Derek
thedayrock is offline   Reply With Quote