View Single Post
Unread 01-08-2020, 05:07 PM   #48
pancho_baño
Registered User
 
Join Date: Aug 2019
Posts: 27
ok, thanks guys.

still trying to do the water test. used some tru blu rectorseal on the rubber plug and left a bit of water over night (just to the first shoulder of the plastic drain flange). It was good for ~6-8 hours last night, however it was slightly lower this morning, so I don't have definitive proof it was the seal of the rubber gasket (which I suspect) or the glued transition between pipe and drain flange. So I wiped away what i could, put a lot more tru blu on there, let it dry for ~2 hrs, then added the water. Will see if the seal is good...
__________________
Pancho

Last edited by pancho_baño; 01-08-2020 at 05:09 PM. Reason: clarify timing
pancho_baño is offline   Reply With Quote