View Single Post
Unread 03-15-2003, 07:04 AM   #15
Bill Vincent
Tile Contractor
Bill Vincent's Avatar
Join Date: Jan 2003
Location: Bridgton, Maine
Posts: 8,631
Before automatically starting full tile at the low point, you might want to check and see what you will end up with at the ceiling. Also, it might be easier, IF you work out to a good piece, to start off taking an inch of at the low point-- it's alot easier than having to nip 1/16" or 1/8" as you go around the tub.

"Whether you think you can, or you think you can't, you're probably right."
Bill Vincent is offline   Reply With Quote