View Single Post
Unread 04-10-2010, 07:39 AM   #6
Steve C
Registered User
 
Steve C's Avatar
 
Join Date: Mar 2004
Location: Southern Illinois
Posts: 1,153
Quote:
Originally Posted by Eric
I was thinking about getting the premade pan, and cutting it down- the niche for the shower is about 35x41 inches
Hi Eric. I'd recommend learning how to build your own pan. I think the Kerdi tray's great, but you need to be able to cut an equal amount from each side of a square tray. If you don't, the perimeter of the tray will be unlevel and uneven due to the slope built into the tray.

I believe there's a John Bridge publication, and a bunch of folks who've done it a bunch of times, around here somewhere that will help you with your pan.
__________________
Steve
Steve C is offline   Reply With Quote