View Single Post
Unread 04-03-2010, 01:57 PM   #3
Registered User
Join Date: Apr 2010
Location: Bothell, WA
Posts: 22
Thanks Kevin.

My intent has been to use Kerdi on the shower, it sounds like a really good way to go. I was thinking about getting the premade pan, and cutting it down- the niche for the shower is about 35x41 inches (with no curb built yet). Seemed simpler than pouring my own.

What are the height restrictions for the Kerdi drain? The top of the PVC is about flush with the slab but the pipe rises about 5" above the outflow pipe. Could I hacksaw off a bit if I need to?

The area of the chunk that is exposed is 5x1 inches.
efjellanger is offline   Reply With Quote