View Single Post
Unread 01-15-2021, 11:07 AM   #6
kennyrboggs
Registered User
 
Join Date: Jan 2021
Posts: 9
Best way to match mosaic strip to remaining wall tile

Doing 3/8" porcelain 12 x 24's on shower walls with most likely a 1/2 square notch trowel, with a thin mosaic strip 1 foot wide through it. I was going to add a layer of 3/16' kerdi board then tile over which was the best option I found, but cant find any locally and shipping is expensive for 1 sheet.

Its a kerdi shower, and I could to an extra layer of thinset or back butter and let it dry, then tile, but figure that would hard tokeep level. Would 1/4inch hardi backer built out on top of the kerdi be acceptable? Or is there another trick to bring it out level with the larger tiles?
kennyrboggs is offline   Reply With Quote