View Single Post
Unread 11-04-2004, 04:37 AM   #8
Tile Contractor
Join Date: Apr 2003
Location: Freeport, ME
Posts: 143
I've used them before. Look inside the frame, there should be some nails (roofing type) on the inside near the top of one side. This is the outside edge of the curb. The liner hangs on these "pins" inside the curb. The inside of the curb length is cut a little shorter to accomodate the liner passing the curb ends and going into the shower. Everything is the same for the liner installation except the liner goes under the curb and hangs on the pins inside the unit. When you mud the pan, also do the curb at the same time. Remember to pack the curb well. Good luck.
Jim Carlin
Regional Director NTCA
JJ Carlin Tile Installations
Freeport, ME
JJC is offline   Reply With Quote