View Single Post
Unread 03-03-2015, 07:07 PM   #1
alex.h
Registered User
 
Join Date: Feb 2012
Location: montreal.canada
Posts: 124
Arabesque 3/4" clay tiles.

So here is the project a fireplace


http://www.johnbridge.com/vbulletin/...1&d=1425430925

And here is the tile.

http://www.johnbridge.com/vbulletin/...1&d=1425430959

And it drinks water like a drunk at 3pm.

http://www.johnbridge.com/vbulletin/...1&d=1425431017



So here is the plan so far. Soak the tiles. Ultralite mortar.we will figure the grout after. A custom cement mix or classic ultracolor S.
And sadly the plywood has to stay. No durock or gyprock.

Any input on the cement? The absorbtion of these tiles?

And the patern sould be this.
There is going to be a wood strips on the corners to make the corner. And it sould be "full to full"



http://www.johnbridge.com/vbulletin/...1&d=1425431017
Attached Images
 
__________________
Alexandre G.V. Hamel. Compagnon région de Montréal
alex.h is offline   Reply With Quote