View Single Post
Unread 03-25-2011, 08:19 PM   #6
builder, anti-builder, rebuilder -- Retired Moderator
Join Date: Mar 2009
Location: oahu
Posts: 13,164
Originally Posted by bob
in any event, a tapered wooden transition strip can be made to account for height differences. It can be finished to match the wood floor.
Name:  fir threshold.jpg
Views: 1759
Size:  56.6 KB

I usually have the top surface a hair higher than the tile. With table saw blade at maximum height, cut a taper down to about 1/4". Sand it, ease the sharp edges, add a couple coats of varnish, screw it down and plug the holes.

"the road to hell is paved with osb, mastic, pre-mixed latex 'grout' or 'thinset', "
dhagin is offline   Reply With Quote