Thread: deflection
View Single Post
Unread 01-19-2022, 06:39 PM   #1
Triple T
Registered User
 
Join Date: Jan 2022
Location: wy
Posts: 4
deflection

Doing some remodeling on a house built in the mid 70's. trying to figure out the deflection for tile for the floor. the floor consists of 6x10 beams that span 14 feet, and are 8 feet apart. there is 1/2" plywood, then 2 1/2" of foam, another layer of 1/2 " plywood, then 1/2" particle board. There are no floor joists. just this plywood, foam combination over the beams. anyone run into this before? and have any idea how to figure if it will hold ceramic tile?
__________________
Tim
Triple T is offline   Reply With Quote