View Single Post
Unread 07-21-2020, 03:17 AM   #10
Tile & Stone Guild
King Of Tile
 
Join Date: Aug 2017
Location: Tn
Posts: 284
I'd go hunt down some replacement pieces. Shouldn't be that difficult to find something. This way if it goes sideways you're covered. Get some silicon carbide sandpaper 200g and 400 grit and wet sand the pieces in their entirety.

This should get rid of the spots but the patina compared to the rest of the floor will be noticeable . Tool Guy suggestion should be considered. Sometimes it's easier to get a pro for something like this, could be cheaper in the long run
__________________
Jeff
Tile & Stone Guild is offline   Reply With Quote