View Single Post
Old 03-04-2011, 05:36 PM   #6
Registered User
Join Date: Feb 2007
Posts: 61
Honeydo -

I'm replacing the current tile with stone tile. I have it all torn out down to the joists. I'm gonna put down a layer of 3/4" ply, 1/2" ply, then 1/4" hardi, then stone.

The overhang of each joist is about 8" past the beam. The drawings are pretty close to scale - the bathroom is only 3' wide, it is sitting damn near on the beam, offset by about 4" to one side so that the centered toilet drain misses the beam. The left side of the bathroom has two joists essentially - the left ones, and the overhang from the right ones. The right side of the room has just the ones going to the right. I think the footprint is 9" on the beam. The fasteners would be just nails....16d i imagine.
pghsebring is offline   Reply With Quote