View Single Post
Unread 02-19-2019, 05:52 PM   #82
Registered User
Join Date: Sep 2018
Posts: 210
The pictures above don't really show the gap well. This is what the gap looks like in profile around the center of the apron:
Name:  tub_edge.jpg
Views: 164
Size:  17.1 KB
The plywood spacing is pretty even all the way across but the tub is farthest back in the middle. The bottom of the tub apron is sitting on spacers but only the ones at the ends are tight.

Not sure how to handle this. Please help.
SpaceCadet is offline   Reply With Quote